Heat Exchanger u-bend 40HP drewing





 

Titanium Heat Exchangers


UMI produces titanium heat exchangers in three series to accommodate a variety of heating and cooling applications and sizes for salt or fresh water aquatic systems..

The Ti-HXU series, designed for large aquatic exhibit temperature control featuring titanium U-tube design in a 10" diameter shell, 5 or 10 feet in length. Because the entire front end of the U-tube exchangers are made of titanium they are well suited for water to water, condenser and direct expansion cooling applications in harsh environmental conditions. Aluminum mounts can be supplied for mounting on floors or on walls.

The Ti-HXF series, designed for moderate sized salt or fresh water systems. The shell and coil are non-toxic, non corrosive and will not leech harmful chemicals into salt water or other media to be chilled. Internal baffles direct water over the coils to maximize efficientcy.Open design allows for greater water flows with minimum pressure drop.  Sensor ports or wells are strategically placed in the path of the incoming water for greater accuracy and safety. Aluminum mounts can be supplied for mounting on floors or on walls.

The Ti-HXM series, heat exchangers for small systems incorporate a PVC molded shell that houses a titanium coil. The shell and coil are non-toxic, non corrosive and will not leech harmful chemicals into salt water or other media to be chilled. Sensor ports or wells are strategically placed in the path of the incoming water for greater accuracy, efficiency and safety.

All UMI titanium heat exchangers can be supplied with the valves, fittings and controls to make your installation easy and cost effective.





Heat Exchangers mounted on frame 80HP

Ti-HXU Series Heat Exchangers are available in 10, 15,20.30,35 and 40HP capacities featuring:

  • 2” PVC pipe water inlet and outlet in 10 ” insulated PVC shell.
  • Baffles direct water flow, increasing efficiency.
  • The flange and U-bundle can be unbolted and removed for inspection or cleaning without opening refrigerant side.
  • The flange plate and connections are titanium eliminating corrosion caused by heat or the environment.
  • Manifold connections are titanium available in  FNPT or made to accommodate Rotalock fittings with or without isolating valves.
  • Can be used as salt water condenser, water to water heating or cooling, and as refrigeration evaporator flooded or direct expansion.
  • Can be linked together for use in larger applications.
  • Fitted with 1/2" titanium sensor well .
  • Can be ordered pre assembled and wired with valves,controls and mounting hardware.

 



Heat Exchanger mounted on frame 7 1/2HP

Ti-HXF Series Heat Exchangers range in size from 1 1/2 HP to 7 1/2 HP and feature:

  • 1/8” – 3/4” watertight compression fitting for temperature  sensor .
  • 2” PVC pipe water inlet and outlet in an 8” insulated PVC shell.
  • PVC flange and flange plate. The flanged shell can be unbolted and removed for cleaning.
  • Available with a titanium flanged end for use in condenser applications.
  • Integral titanium sensor well option.
  • Can be ordered pre assembled and wired with valves,controls and mounting hardware.


Heat Exchanger Mounted on frame 1HP

Ti-HXM Series Heat Exchangers range in size from 1/5 HP to 1 HP and feature:

  • 1/8” – 1/2” watertight compression fitting for temperature sensor .
  • 1” FNPT water inlet and outlet.
  • Molded PVC inlet end cap.
  • The shell and coil are non-toxic, and non corrosive 
  • Integral titanium sensor well option.
  • Can be ordered pre assembled and wired with valves,controls and mounting hardware.